中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
HG/T 2193-2014 洗衣机和洗碗机用橡胶和塑料进水软管和软管组合件 规范(中英文版) Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers-Specification (idt ISO 6804: 2009) |
|||
GB/T 18950-2023 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定(中英文版) Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. |
|||
HG/T 2875-2023 橡塑鞋微孔材料交联密度特征值试验方法(中英文版) Test method for characteristic value of cross-linking density of microporous materials in rubber and plastic shoes |
|||
HG/T 2580-2022 橡胶或塑料涂覆织物 拉伸强度和拉断伸长率的测定(中英文版) Rubber or plastics coated fabrics - Determination of tensile strength and elongation at break |
|||
GB/T 42279-2022 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变(中英文版) Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load |
|||
GB/T 22530-2022 橡胶塑料注射成型机安全要求(中英文版) Safety requirements for rubber and plastic injection molding machines |
|||
GB/T 41931-2022 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验(中英文版) Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test |
|||
GB/T 5568-2022 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验(中英文版) Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection |
|||
HJ 1207-2021 排污单位自行监测技术指南 橡胶和塑料制品(中英文版) Technical guide for self-monitoring of pollutant discharge units Rubber and plastic products{译} |
|||
GB/T 39693.9-2021 硫化橡胶或热塑性橡胶 硬度的测定 第9部分:硬度计的校准和验证(中英文版) Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers |
|||
GB/T 40719-2021 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定(中英文版) Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity |
|||
GB/T 38687-2020 橡胶塑料机械 外围设备通信协议(中英文版) Rubber and plastics machinery—Communicating protocol for auxiliary equipment |
|||
GB/T 25156-2020 橡胶塑料注射成型机通用技术要求及检测方法(中英文版) General specifications and inspection methods of rubber and plastics injection moulding machines |
|||
GB/T 38533-2020 橡胶塑料注射成型机 模具固定和联接尺寸(中英文版) Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions |
|||
HJ1122-2020 排污许可证申请与核发技术规范 橡胶和塑料制品工业(中英文版) Technical Specifications for Pollution Discharge Permit Application and Issuance Rubber and Plastic Products Industry |
|||
HG/T 3050.1-2020 橡胶或塑料涂覆织物 整卷特性的测定 第1部分:测定长度、宽度和净质量的方法(中英文版) Rubber or plastic coated fabrics - Determination of whole roll properties - Part 1: Methods for determining length, width and net mass |
|||
HG/T 3050.2-2020 橡胶或塑料涂覆织物 整卷特性的测定 第2部分:测定单位面积的总质量、单位面积的涂覆质量和单位面积的底布质量的方法(中英文版) Rubber or plastic coated fabrics - Determination of whole roll properties - Part 2: Methods for determining total mass per unit area, coating mass per unit area and base fabric mass per unit area |
|||
GB/T 39692-2020 硫化橡胶或热塑性橡胶 低温试验 概述与指南(中英文版) Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide |
|||
GB/T 39483.2-2020 橡胶塑料注射成型机 接口 第2部分:数据交换接口(中英文版) Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface |
|||
GB/T 39327-2020 船用发动机湿式排气系统用橡胶和塑料软管 规范(中英文版) Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification |
找到:142條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 |